DIY tree removal

Are you looking to remove a tree in your backyard all on your own? You are at the right place then, because, for adventurous garden lovers who are looking at this as a DIY project, this is the best opportunity. Some of you might want professional service for removing an old dead tree from your lawn but some of you might want to do all this on your own.

So, which one is better? Should you consider hiring some professionals or do it on your own and save a hell lot of money? This article right here is to guide you through the whole process of removing a tree!

Benefits of DIY tree removal

There are many benefits to DIY tree removal and we have listed some of them below:

 

healthy exercise

If you are the type of person who stays in the office all day with no physical activity in life then this is the best project you can opt for. This not only is a healthy activity but will also give insight to some of the basis of gardening and tree removal if you are a lawn lover. A person like you would rarely get out to have fresh air through participation in healthy activities. So, this one right here is the best opportunity for you to brush up your muscles.

 

Saving money

Tree removal is an extremely expensive job and if you are planning to save some extra money then you are thinking in the right direction. Yes, this activity is really good to save money for you.

 

Learn new skills

You are not only going to save money and participate in a healthy activity but also gain new and exciting skills. If you are new to this, then you are going to learn a lot through this project.

Small vs large trees

There are different sizes and types of trees and for each type, you must use the required equipment and techniques in the process of tree removal. Following are some of the tips that you might need to keep in mind while removing small and large trees at your home.

Cutting Up the Pieces

The final step is to break all the large pieces of your tree into smaller pieces. If the tree is small then just simply feed its branches to a wood chipper. You can also use a log splitter for larger trees but operate it only if you know because it is a very dangerous machine.

Apart from all these things, you must need to be familiar with the concepts of weight distribution and bar insertion into the tree.  

Preparing the Fall

The tree is going to fall and for that, you must be prepared. You must avoid all kinds of damages and wear proper safety gear. Start by cutting out the wedge near the base of the tree. Also, make a hinge cut on the opposite side. The cut of the wedge should be in the direction of fall.

If the tree is large enough, then you should remove its branches first before actually cutting the base of the tree. If the tree is too near to your property then you must cut its trunk piece by piece. For larger trees, you should opt a top to bottom approach by removing the top portion first and then coming down piece by piece.

 

Do you need council approval

You can not simply cut any tree even on your personal property because of government rules and regulations. However, the rules might differ in each state of Australia.

If you are planning to remove a tree at your home then do get an approval from the council first. If you are cutting a tree at someone else’s property then ask them to get an approval from the council.

A professional arborist can help you and guide you regarding the local laws of tree removal.

What gear do you need

The most important thing about this project is your equipment. You are going to need a stump grinder, a small and a large chainsaw and a wood chipper. If the tree is very large then you might need some extra help and extra equipment.

To reach the desired height, you will need a cherry picker along with a pole pruner. You will also need a log splitter to split up large pieces. You will also have to work on the angles of fall. These pre calculations would require you to know about the direction of fall of the tree, which is extremely important.

 

DIY tree removal potential hazards

Sydney Tree removal is an extremely critical process and you need to be very sure about this if you are planning to do it. The most crucial part of the whole process in the fall, which if not carried out properly can result in a lot of damage. If the tree falls in the wrong direction, it can create a mess. You also have to be very careful while using shape blades and electric chain saws because they can cut through your hands. 

Conclusion

Tree removal can be a fun and healthy activity if you are thinking about saving some extra money. Removing a tree is not an easy job so you must be extremely careful if you are planning to do this job. Safety is very important in this kind of job because a small mistake can damage you and your property. However, if you have taken all the precautionary measures and own all the required equipment then you can follow our guide and start working on this DIY project.

 

Call Now Button
%d bloggers like this: